Setting Up; Assembly; Connecting To A Stereo; Receiving The Xm Signal - Delphi MyFi User Manual

Setting Up

Assembly

Insert the battery and assemble your MyFi and its home
stand as shown; plug the AC adapter into an outlet. Let
the battery charge for at least three hours.
Insert battery
Important: You will need to fully charge your MyFi
battery for at least three hours to have sufficient battery
power for portable use.
Assemble home stand
12

Connecting to a stereo

Plug the AC adapter into an outlet. Connect the home
antenna and connect the line out to either your home
stereo or powered (PC type) speakers.
5V DC ANT LINE OUT

Receiving the XM signal

Turn your MyFi on by pressing the power button. You
should be able to hear channel 1, the XM Preview
Channel. If you do not, and the screen displays "NO
SIGNAL," try moving your MyFi's antenna to another
location. Make sure the antenna points south, either
outdoors or through a window. If the "NO SIGNAL"
message persists, refer to "Aiming the home antenna"
(page 28).
Please read the TIP below the illustration for optional
setup and activation procedure information.
Aim antenna
TIP: Establishing a good signal environment in the home
setup is highly desirable, but this is not the only way you
can receive the XM signal. As an option, you can refer to
"Using MyFi In Your Vehicle" (page 29) and continue
this setup and activation process with your MyFi installed
in a vehicle.
Connect to stereo
13