Retrieving S! Mail Message
When an S! Mail exceeds 285 characters (285 bytes), the initial portion of
the message is delivered as a notifi cation. To retrieve the complete
message, perform the following steps:
1
Open an S! Mail notification
For details on displaying messages, see page 23-46.
2
Select Retrieve Mail and press @
The complete message is downloaded.
Tip
To delete the message from the server, press
7
select Delete.
Replying to a Message
1
Open the message
For details on displaying messages, see page 23-46.
2
Press J (Reply)
3
Select Blank, With Text or Refer and press @
For details on creating messages, see "Sending Messages" on the
right.
Forwarding a Message
1
Open the message
For details on displaying messages, see page 23-46.
810T_811T_0608.indb 23-47
810T_811T_0608.indb 23-47
2
Press K (Menu)
3
Select Divert and press @
For details on creating messages, see below.
Sending Messages
1
In standby mode, press J
2
Select Create Msg. and press @
3
Select Mail Type → SMS or S! Mail
k
K (Menu) after Step 1 and
4
Select Address and press @
5
Enter an address and press @
Alternatively, you can search for an address from the Phone Book,
Simple Input, Sent Log, Received Log, or set a group.
6
Select Subject and press @
7
Enter the subject and press @
8
Select Text and press @
9
Enter the body text and press @
10
Select Files and press @
11
Specify an attachment file and press @
12
Press J (Send), select OK and press @
23
23-47
06.9.4 4:14:45 PM
06.9.4 4:14:45 PM