Epson WF-7210 Series Administrator's Manual page 17

Administrator's Guide
5. Select Advanced Setup.
6. Select TCP/IP Address.
7. Select Manual.
When you set the IP address automatically by using the DHCP function of router, select Auto. In that case, the
IP Address, Subnet Mask, and Default Gateway on step 8 to 9 are also set automatically, so go to step 10.
8. Enter the IP address.
u d
Press the or button to enter.
9. Set up the Subnet Mask and Default Gateway.
Important:
c
If the combination of the IP Address, Subnet Mask and Default Gateway is incorrect, an error message is
displayed and you cannot proceed with the settings. Confirm that there is no error in the entry.
10. Press the OK button to finish.
Press the button several times as necessary to return to the home screen. The home screen is automatically
displayed after a specific length of time if you do not press the
Connection
button.
17