Fiio X3 Complete User's Manual page 10

e) Default Volume and f) Fixed Volume Setting
For the Default Volume setting, choose between the Memory and Custom options. With memory,
when turned on the X3 will be set at the volume that it was at before being turned off. With Custom,
you can choose a particular volume level to be set to when the X3 turns on in the Fixed Volume
Setting option (press Enter on that option to enter the sub-menu to specify the desired volume with
the scroll wheel). The Fixed Volume Setting is not available when Default Volume is set to Memory.
g) Equalizer
You can choose from a variety of preset EQ settings (Rock, Classical, Jazz, Pop, Dance, Vocal, Metal
and ACG) or define your own EQ (Custom). Each of these EQ settings may be modified. To modify
any EQ, highlight the desired EQ and press Enter. Then use the scroll wheel to select which
frequency you want to change, and press Enter. After doing so, use the scroll wheel again to change
the frequency to your desire. Press the Enter button when finished. After repeating for all other
frequencies that you want to change, press Back to save your changes to the EQ preset. Pressing
the shortcut key at any time in this menu will display a prompt to reset the currently highlighted EQ
to its default settings.
h) Line Out Mode
Choose from Fixed Level or Volume Adjustable. If Fixed Level is selected, the output will be fixed
with the maximum level.. If Volume Adjustable is selected, you can use the volume buttons to
adjust the line-out volume (the Fixed Level option will not be available in this case).
(Note: Please be careful when the Line Out mode is set to fixed level and the output mode is set to
Line Out. You will not be able to adjust the loud volume and you may damage your hearing if you
plug in headphones when set to this mode.)
i) Balance
Press the Enter button to adjust channel balance. Use the scroll wheel to make the sound louder
either through the left or right channels. There are 10 steps of adjustment for either direction, with
th
the 10 step being about 5dB louder in that direction.
j) Play Through Folders
If this is set to On, the X3 will start playing tracks in the current folder. Once it has finished playing
the last song in the current folder, it will begin to play the first song in the next folder. If there are
any sub-folders within the folder, it will also play those before playing the next folder. If this is set
to Off, only the tracks in the current folder will be played and the X3 will not play songs from other
folders.
k) Multifunctional Button
The setting includes 4 options: Playback control, EQ, Jump list and Theme. To use the touch wheel
10
10