Table of Contents
Advertisement
Problem
1)
Drying cy‐
cle too
long
7)
1) If there is an error message on the display (e.g. E51): Turn the tumble dryer off and on. Select a
new programme. Touch the Start/Pause button. If the appliance does not operate contact the service
centre and provide the error code.
2) Follow the programme description — see the PROGRAMMES chapter .
3) See the CARE AND CLEANING chapter.
4) Only dryers with the Dryness option.
5) See the HINTS AND TIPS chapter .
6) See chapter CARE AND CLEANING
7) Note: After a maximum of 5 hours the drying cycle ends automatically.
Possible cause
The filter is clogged.
The load is too large.
The laundry was not
spun sufficiently.
Too low or too high
room temperature - this
is not the appliance mal‐
function.
TROUBLESHOOTING
Remedy
Clean the filter.
Do not exceed the maxi‐
mum load size.
Spin the laundry well in
the washing machine.
Ensure a room tempera‐
ture higher than +5°C
and lower than +35°C.
Optimal room tempera‐
ture to achieve best dry‐
ing results is between
19°-24°C.
39/48
Advertisement
Table of Contents
