D-Link DCS-910 Quick Install Manual page 9

Configuring Your Camera with
the Installation Wizard
Click on the D-Link Setup Wizard SE icon that was created in your
Windows Start menu.
The Setup Wizard will appear and show the MAC address of the
DCS-910/920 and an IP Address (which may or may not be correct
depending on what you have your DCS-910/920 connected to). If
you have a DHCP server on your network, there will be a valid IP
Address displayed here.
Note: A DHCP server is a device that supplies IP addresses to your
network devices automatically.
Your camera's IP Address will
be displayed here along with its
corresponding MAC Address.
Click the Wizard button
9 D-Link DCS-910/90 Quick Install Guide
Configuration