Automatic Powersaving - Kurzweil SP6 Getting Started Manual

GETTING STARTED GUIDE
5. If you are using a mixer and hear distortion, reduce the gain level on the mixer, or use the
mixer's Pad button if it has one (a button that typically decreases the audio input level by
20dB).
6. After using the SP6, if you are using speakers, turn the master volume all the way down on
your amplifier or mixer before powering off the SP6.
Auditioning SP6 Sounds
1. The SP6 starts up in Program Mode. Use the PREVIOUS and NEXT buttons, ALPHA
WHEEL, or CATEGORY buttons to select a different Program. See
page 11
1. To hear a Program Demo song for the current Program, press the KEYPAD and ENTER
buttons simultaneously.
2. To hear the capabilities of the SP6, you can play the multi-channel demo songs. Press the
KEYPAD and DRUMS/PERC buttons simultaneously to listen to a multi-channel demo
song.
3. To switch between auditioning Programs or Multis, press the PROGRAM or MULTI
Mode button under the MODE label to the right of the LCD display.
Automatic Power Saving
The SP6 has an automatic power saving feature (Auto Power Off) that can automatically power
off the SP6 after a period of inactivity, in order to conserve electricity. The Auto Power Off
feature is enabled by default. The default Power Off Time is 8 hours, which will cause the SP6
to power off after 8 hours of inactivity.
A count down timer warning will be shown in the LCD display a few minutes before the SP6
is powered off. At any time, touching any SP6 control or playing a note will cause the SP6 to
remain powered on, until the SP6 has been inactive for the set Power Off Time.
Auto Power Off can be disabled in Global Mode. The Power Off Time can also be adjusted in
Global Mode.
for more details on selecting Programs or Multis.
The Front Panel
Auditioning SP6 Sounds
"SP6 Sounds" on
3