Advertisement
Connect the A C F - 3 0 0 0 D M - A output cable to your measuring instrument using
an adapter.
Set up the A C F - 3 0 0 0 - D M - A range to either 300 or 3000A respective to the
setup on the measuring instrument
E x a m p l e :
Range (Amps)
Proper Setup on the DM-II
< 3 0 0
A C F 3 0 0 0
< 3 0 0 0
A C F 3 0 0 0
O u t p u t :
300ARange:
1.0mVAC/Amp
3000A Range: 0.1mVAC/Amp
Return the ACF-3000 range switch to the OFF position when measurement is
completed to preserve battery life.
Preventive maintenance primarily consists of cleaning the transducers and
cables to prevent surface contamination. Use a mild detergent and water to
clean the transducers and cables. Remove the detergent with clear water,
then wipe dry with a clean cloth.
N o t e : The use of solvents as cleaners is not recommended unless
thoroughly tested and found harmless to all surfaces and parts.
Do not submerse current transducer into water or other fluids.
Proper Setup on the
A C F 3 0 0 0 - D M - A
3 0 0
3 0 0 0
M A I N T E N A N C E
8
3 0 0
3 0 0 0
Advertisement
