Chapter 2. Basic Functions; Correcting Dialing Mistakes; Receiving Calls - LG RD 6700 User Manual

Chapter 2. Basic Functions

Turning the Phone On and Off
Turning the Phone On
1. Install a charged battery pack or connect the phone to an external power source such as the cigarette
lighter adapter or car kit.
2. Press [END/PWR] for a few seconds until the red light on the top of the phone flashes.
Fully extend the antenna for the best performance.
<Note> Like any other radio device, avoid any unnecessary contact with the antenna while your phone is on.
Turning the Phone Off
1. Press and hold until display screen will be turned off, and then release the key.
2. Protect the antenna by pushing it back into the phone, if extended.
Making a Call
When you make a call, follow these simple steps:
1. Make sure the phone is turned on.
If not, press [END/PWR].
2. Enter the phone number with area code, if needed.
3. Press [SEND].
If the phone is locked, enter the lock code.
"Call Failed" indicates that the call did not go through.
4. Press [END/PWR] to disconnect the call.

Correcting Dialing Mistakes

If you make mistakes in dialing a number, press [CLR] key once to erase the last entered digit or hold down
[CLR] for at least two second to delete all digits, or simply press END Key to exit dialing state.

Receiving Calls

1. When the phone rings, press any key (except [END/PWR], [5][6][3][4]) to answer.
If you press the key [END/PWR] once when you receive a call, you can hold the present call and
ring sound or vibration stops. If you press the [END/PWR] key twice, the present call is terminated.
2. Press [END/PWR] to disconnect the call.
In call waiting mode, the present call is on hold as you answer another incoming call.
This service is provided by your service provider.
When the call waiting function is activated, your phone will beep to let you know if you have an incoming
call. Your phone may also display the incoming caller's identification.