How To Mount The Lens; How To Remove The Lens; Tripod Socket; Hook For The Wrist Strap - Sony UMC-R10C Technical Manual

r Access lamp
s Attachment removal lever
No attachment is supplied with the camera.
t Tripod socket
Use a tripod with a screw length that is less than 5.5 mm
(7/32 inches). Otherwise, the camera may be damaged
because it cannot be securely fixed on a tripod with a screw
length that is 5.5 mm (7/32 inches) or longer.
u Hook for the wrist strap
Tip
To prevent the camera from falling, we recommend that
you tie a wrist strap to this hook.
No strap is supplied with the camera.
• Maximum load for a wrist strap: 850 g

How to mount the lens

1
Remove the lens front cap, lens rear cap and body cap.
2
Align the two white dots ( ) on the lens and camera,
then engage. Push the lens to the camera softly, then
rotate it slowly clockwise until it clicks to be locked.
Notes
• When you mount the lens, do not press the Lens release
button.
• Do not insert the lens at a tilted angle.

How to remove the lens

1
Rotate the lens counterclockwise by pressing the Lens
release button, then remove.
4