HP 12500 series Command Reference Manual page 10

Views
Any view
Predefined user roles
network-admin
network-operator
mdc-admin
mdc-operator
Parameters
verbose: Displays detailed MAD information. If this keyword is not provided, the command only
displays whether a MAD mechanism is enabled.
Examples
# Display brief MAD information.
<Sysname> display mad
MAD ARP disabled.
MAD LACP disabled.
MAD BFD disabled.
# Display detailed MAD information.
<Sysname> display mad verbose
Current MAD status: Detect
Excluded ports(configurable):
GigabitEthernet 2/1/0/2
GigabitEthernet 2/1/0/3
Excluded ports(can not be configured):
Ten-GigabitEthernet 1/2/0/25
Ten-GigabitEthernet 2/2/0/26
MAD enabled aggregation port:
Bridge-Aggregation2
MAD BFD enabled interface:
Vlan-interface10
mad ip address 10.0.0.2 255.255.0.0 member 1
mad ip address 10.0.0.3 255.255.0.0 member 2
Table 5 Command output
Field
Current MAD status
Description
MAD status:
•
Detect—The IRF fabric is integrated.
•
Recovery—IRF fabric is in Recovery state. When detecting a
multi-active collision, MAD places the IRF fabric with higher master
ID in Recovery state and shuts down all physical ports in the fabric
but IRF physical ports and ports that are configured to not shut
down.
• Detect to Recovery—State of the IRF fabric is transitioning from
Detect to Recovery, for example, as the result of an IRF split.
• Recovery to Detect—State of the IRF fabric is transitioning from
Recovery to Detect.
7