HP FlexFabric 5700 series Configuration Manual page 32

Figure 11 Recovering the IRF fabric
If the active IRF fabric fails before the IRF link is recovered (see
on the inactive IRF fabric to recover the inactive IRF fabric. The command also brings up all network ports
that were shut down by MAD. After you repair the IRF link, the two parts merge into a unified IRF fabric.
Figure 12 Active IRF fabric fails before the IRF link is recovered
To manually recover an inactive IRF fabric:
Step
1. Enter system view.
2. Recover the inactive IRF fabric.
Figure
Command
system-view
mad restore
28
12), use the mad restore command