Width Of The Transmission Window; Impact Of Secondary Fields - Siemens SIMATIC RF300 System Manual

4.1.3

Width of the transmission window

Determining the width of the transmission window
The following approximation formula can be used for practical applications:
B:
L:
Tracking tolerances
The width of the transmission window (B) is particularly important for the mechanical tracking
tolerance. The formula for the dwell time is valid without restriction when B is observed.
4.1.4

Impact of secondary fields

Secondary fields in the range from 0 to 20 mm always exist.
They should only be applied during planning in exceptional cases, however, since the
read/write distances are very limited. Exact details of the secondary field geometry cannot be
given, since these values depend heavily on the operating distance and the application.
SIMATIC RF300
System Manual, Release 04/2006, J31069 D0166-U001-A2-7618
Width of the transmission window
Length of the transmission window
RF300 system planning
4.1 Fundamentals of application planning
4-5