Pre-Installation; Mounting The Anti-Tip Brackets - Blomberg BRFB1920SS Installation Instructions Manual

CONFIDENTIAL

PRE-INSTALLATION

Continue to install the product according to the instructions below. Additionally, consider national and local
instructions regarding installation.
Please observe the following:

For the USA, The National Electrical Code, ANSI/NFPA 70 – last version/State or Municipality
directives and/or regional directives.

For Canada, The Canadian Electrical Code, C22.1 – last version/State or Municipality directives
and/or regional directives.

Mounting the Anti-Tip Brackets

WARNING:
You must definitely use Anti-Tip Brackets to prevent the appliance from tipping over.
WARNING:
Make sure that there is no electrical or water connection where the screws will be tighten and connections will be
established.
WARNING:
Please remember to use the necessary protective equipment when drilling holes on the wall and performing
installation.
31