Brother 885-E35 Operation Manual page 51

1 Stitch category selection key
2 Character stitch indicator
<For models equipped with 2 font types of
character stitches>
Press the character stitch key once or more
and confirm that the desired font type of
character stitch indicator is lit.
1 Character stitch key
2 Character stitch indicator (Gothic font)
3 Character stitch indicator (Script font)
Memo
• When you select a character, check that
there are no characters in memory.
1 This indicator shows that no character is stored.
If there are any characters in memory,
delete them. (For details, refer to "Deleting
characters" (page 51).)
3
Press (stitch selection keys) to select
pattern No. 03.
• For details, refer to step
stitch" (page 26).
4
Press the "+" side of
adjustment key) to enter the selected
character.
3
of "Selecting a
(stitch width
X The following display is shown on the LCD.
1 Selected pattern No.
2 The position of the selected pattern No.
3 The total number of entered characters
5
Attach the presser foot indicated on the LCD.
1 The presser foot to use
• For details, refer to "Replacing the presser
foot" (page 23).
6
If you would like to only sew this single
character, start sewing.
If you would like to sew a sequence of
characters, see the following procedure.
• For details on sewing characters, refer to
"Sewing the character stitches" (page 51).
■ Combining characters
You can easily sew names, messages, etc. by
combining the character stitches. Up to 35
characters can be combined.
[Example] Selecting stitches "COME" (No.
03)+(No. 15)+(No. 13)+(No. 05)
1
1
Follow steps through
characters" (page 48) to select the first
character "C" (No. 03).
2
Press (stitch selection keys) to select the
next character, "O" (No. 15).
3
Press the "+" side of
adjustment key) to enter the selected
character.
4
2
Repeat steps and
and "E" (No. 05).
Memo
• To enter a space, select "_" (No. 30).
UTILITY STITCHES
5
in "Selecting
(stitch width
3
to add "M" (No. 13)
49
3