Technical Specifications - PURE Pop Midi with Bluetooth User Manual

Technical specifications

Radio
Frequencies
Bluetooth
Speaker
Audio power output
Input connectors
Output connectors
Presets
Power supply
Power consumption (Standby mode) - 0.5W (limit 1W)
Dimensions
Aerial
Approvals
22
Digital and FM radio
DAB/DAB+, FM radio 87.5-108 MHz
Built-in Bluetooth with A2DP support
Full-range 3" drive unit
4.3W RMS
5.5V DC power adaptor socket (230V supplied)
3.5mm stereo headphone socket
10 digital radio and 10 FM radio presets
230V AC to 5.5V (2.0A) DC external power adapter
(supplied), optional ChargePAK D1 rechargeable battery
pack or four AA batteries)
Networked Standby mode activated - Automatic after no
Bluetooth detected
Power Consumption (Networked Standby mode) – 1.0W
Wireless Network(s) On/Off switch - Only single Bluetooth
wireless network connection and the network connection is
always activated
Standby And/Or Off mode activated – Standby mode, press
the large circular button/knob so that it is in the 'down'
postiion and level with the top panel
93 mm wide x 173 mm high x 102 mm deep
Telescopic aerial
CE marked. Hereby, Pure, declares that this Band II LPD
device is in compliance with the essential requirements and
other relevant provisions of Directive 1999/5/EC.
The Declaration of Conformity may be consulted at:
http://www.pure.com/R&TTE-DoC.
ETSI EN 300 401 compliant
Australian C-Tick N1600 and Electrical Safety