Canon TR7500 Series Online Manual page 297

Important
• If you load the original on the platen glass, do not open the document cover or remove the original
while Scanning document... is displayed on the touch screen.
• If you load the original in the ADF, do not move the original until copying is complete.
Note
• To cancel copying, touch the Stop button.
Adding Copying Job (Reserve copy)
If you load the original on the platen glass, you can add the copying job while printing (Reserve copy).
The screen below is displayed when you can add the copying job.
Load the original on the platen glass and press the same button (the Color button or the Black button) as
the one which you previously pressed.
Important
• When you load the original on the platen glass, move the document cover gently.
Note
• When Print qlty (print quality) is set High, you cannot add the copying job.
• When you add the copying job, the number of copies or the settings such as the page size or media
type cannot be changed.
• If you touch the Stop button while reserve copying is in progress, the screen to select the method to
cancel copying is displayed. If you select Cancel all reservations, you can cancel copying all
scanned data. If you select Cancel the last reservation, you can cancel the last copying job.
• If you set a document of too many pages to add the copying job, Cannot add more copy jobs.
Please wait a while and redo the operation. may appear on the touch screen. Select OK and wait
a while, and then try copying again.
• If Failed to reserve the copy job. Start over from the beginning. appears on the touch screen
when scanning, select OK and touch the Stop button to cancel copying. After that, copy the
documents that have not been finished copying.
297