Motorola MOTO e4 User Manual page 31

Manage devices
To manually reconnect your phone with a paired device, tap the device name in the list.
To manually disconnect your phone from a paired device, tap the device name in the
list, then tap OK.
To remove a paired device, tap next to the device name, then tap FORGET.
To change the name your phone shows to other devices, swipe up
Bluetooth, turn Bluetooth power on, then tap Menu > Rename this device. Enter a
name and tap RENAME.
Let devices find your phone
To let a Bluetooth device discover your phone, tap the Bluetooth switch on your phone
to turn it on.
Transfer files
• Photos or videos: Open the photo or video, then tap
• Contacts: Swipe up > Contacts, tap a person, then tap Menu > Share >
Bluetooth.
Wi-Fi networks
Turn Wi-Fi power on/off
Find it: Swipe up > Settings > Wi-Fi, then tap the switch to turn it on
Note: Swipe down the status bar with two fingers to quickly turn Wi-Fi on or off.
Connect to networks
To find networks in your range:
1 Swipe up > Settings > Wi-Fi.
Tip: To show your phone's Wi-Fi settings, tap Menu > Advanced.
2 Make sure the Wi-Fi is turned on.
3 Tap a found network to connect to it (if necessary, enter Network name, Security,
and Wireless password, and tap Connect).
When your phone connects, the Wi-Fi status indicator
Tip: When Wi-Fi is on, your phone automatically reconnects to available networks it
has used before. If a router previously had no internet connection, your phone will not
automatically connect to it.
Wi-Fi hotspot
> Settings >
Your can make your phone a Wi-Fi hotspot to provide portable, convenient internet
access to other Wi-Fi enabled devices. This feature may require an additional
subscription service from your carrier.
Note: Keep it secure. To protect your phone and hotspot from unauthorized access, it
is strongly recommended that you set up hotspot security (WPA2 is the most secure),
including password.
Find it: Swipe up
Portable Wi-Fi Hotspot
> Bluetooth.
Note: These steps may vary depending on your network.
1 Your phone turns off Wi-Fi and uses the mobile network for internet access. Tap Set
2 Tap SAVE when the settings are complete.
When your Wi-Fi hotspot is active, other Wi-Fi enabled devices can connect by entering
your hotspot's Network name, selecting a Security type, and entering the correct
wireless Password.
Wi-Fi modes
For those who like to get a bit more technical, your phone supports the following Wi-Fi
modes: 802.11 a, b, g, n.
appears in the status bar.
Note: If you see a question mark in the Wi-Fi status indicator
bar down, tap the network, and enter the network's password.
> Settings > More > Tethering & portable hotspot, then tap
up Wi-Fi hotspot to set up security:
• Network name: Enter a unique name for your hotspot.
• Security: Select the type of security you want: None or WPA2 PSK. For WPA2
PSK, enter a unique password that others will need to access your Wi-Fi hotspot.
Note: WPA2 PSK is recommended by IEEE.
• Password: Create a password with at least eight characters.
, swipe the status
Connect & transfer 31