Table of Contents
Advertisement
6.
Locate the DIMM sockets.
7.
Open both latches of the memory module socket (1), and insert the memory module into the
socket (2).
NOTE:
with the tab on the memory socket.
For maximum performance, populate the sockets so that the memory capacity is spread as
equally as possible between Channel A and Channel B. Refer to
on page 6
8.
Push the module down into the socket, ensuring that the module is fully inserted and properly
seated. Make sure the latches are in the closed position (3).
9.
Repeat steps 7 and 8 to install an additional module.
10.
Replace the access panel.
11.
Reconnect the power cord and turn on the computer.
12.
Lock any security devices that were disengaged when the access panel was removed.
8
Chapter 2 Hardware upgrades
A memory module can be installed in only one way. Match the notch on the module
for more information.
Populating DIMM sockets
Advertisement
Table of Contents
