EXTERIOR LIGHTS
Headlights
The multifunction lever, located on the left side of
the steering wheel, controls the operation of the
headlights, headlight high beams, lane change assist
and turn signals.
NOTE:
The external lights can only be turned on with the
ignition in the MAR (ACC/ON/RUN) position.
18
Turn Signal/Lights Lever
1 — Turn Signals
2 — High Beams
3 — Flash-To-Pass
4 — Headlights
Rotate the end of the multifunction lever upward
to the first detent for headlight operation.
NOTE:
When the headlights are turned on, the Daytime
Running Lights will be deactivated.
Daytime Running Lights — If Equipped
To activate the Daytime Running Lights (DRL),
rotate the end of the multifunction lever to the
O symbol.
NOTE:
The low beams and side/tail lights will not be on
with DRL.
The DRL function can be turned on or off
through the touchscreen. Refer to your Uconnect
Supplement Manual for further information.
High Beams
With the low beams activated, push the multi-
function lever forward (toward the front of the
vehicle) to turn on the high beams.The lever will
remain forward in a fixed position and the telltale
will illuminate in the instrument cluster display.
Pull the multifunction lever rearward (toward the
rear of the vehicle) to turn off the high beams.