Table of Contents
Advertisement
SYSTEM CONFIGURATION GUIDE
8 PCI Card
Please refer to
Supported PCI Cards and Installable Slots
supported.
8.1
Network Interface Controller
Category
LOM
Adapter
LAN
Mezzanine
SFP
Module
Cable
NOTE:
Network performance depends on the application running on the system and the memory bandwidth. Installing more than six ports
of 10G LAN (including on-board 2-port LAN) may degrade network performance. If network throughput is important, we
recommend that you evaluate the performance with your systems in advance.
NEC Corporation
–
NEC Express5800/D120h
Product Name / Description
10GbE
Dual Port 10GBASE-T LOM
Intel® Ethernet Controller X550-AT2
PCIe 3.0(x4)
1GbE
1000BASE-T Adapter
Broadcom ® BCM5718 Gigabit Ethernet Controller
PCIe 2.0(x1)
Dual Port 1000BASE-T Adapter
Broadcom ® BCM5718 Gigabit Ethernet Controller
PCIe 2.0(x1)
NOTE:
-
Network cables with RJ-45 plug covers cannot be used.
Quad Port 1000BASE-T Adapter
Broadcom ® BCM5719 Gigabit Ethernet Controller
PCIe 2.0(x4)
NOTE:
-
Network cables with RJ-45 plug covers cannot be used.
-
Up to 1 x N8104-152 can be installed into server module with Windows
Server.
10GbE
10GBASE SFP+ Adapter (SFP+/2ch)
QLogic NetXtreme II BCM57810S
PCIe 2.0(x8)
NOTE:
-
- N8104-129 SFP+ Module is required to connect with an optical cable.
Dual Port 10GBASE-T Adapter
Intel® Ethernet Controller X550
PCIe 3.0(x4)
10GBASE Adapter (SFP+/2ch)
Intel® Ethernet Converged Network Adapters X710
PCIe 3.0(x8)
NOTE:
-
N8104-129 SFP+ Module is required to connect with an optical cable.
10GBASE Adapter (QSFP+/4ch)
Intel® Ethernet Converged Network Adapters XL710
PCIe 3.0(x8)
NOTE:
-
Only 10Gb connection is supported for higher level network.
-
N8104-161 QSFP+ Module is required to connect
-
Use optical breakout cable for N8104-161.
1GbE
Quad Port 1000BASE-T Adapter
Intel Ethernet Controller i350-AM4, PCIe2.0 x4
RJ.5 connector
NOTE:
-
The connector is 4x RJ.5. Please purchase required number of K410-
366(0A) to connect RJ45 cable.
10GbE
Dual Port 10GBASE-SFP+ Adapter
QLogic BCM57810S, PCIe 2.0 x8
NOTE:
-
N8104-129 SFP+ Module is required to connect with an optical cable.
10GbE
SFP+ Module (10G-SR)
1 x SFP+ Module
QSFP+ Module
1 x QSFP+ Module for N8104-159
1GbE
RJ.5 Conversion Cable
RJ.5 – RJ45 conversion cable, 25cm, one cable
NOTE:
- K410-366(0A) is for N8104-168. Please purchase required number of
K410-366(0A) if you install N8104-168.
Revision 1.0 – October, 2017
with regard to the position of PCI slot which can mount PCI card
Part Number
(Standard)
N8104-150
N8104-151
N8104-152
N8104-149
N8104-157
N8104-158
N8104-159
N8104-168
N8104-170
N8104-129
N8104-161
K410-366(0A)
20
Advertisement
Table of Contents
