Configuration Procedure - HP FlexFabric 5700 series Configuration Manual

Hide thumbs Also See for FlexFabric 5700 series:
Table of Contents

Advertisement

Figure 21 Network diagram
XGE1/0/1
Switch A

Configuration procedure

# Create basic ACL 2000, and configure a rule to match packets with source IP address 2.1.1.1.
<SwitchA> system-view
[SwitchA] acl number 2000
[SwitchA-acl-basic-2000] rule permit source 2.1.1.1 0
[SwitchA-acl-basic-2000] quit
# Create basic ACL 2001, and configure a rule to match packets with source IP address 2.1.1.2.
[SwitchA] acl number 2001
[SwitchA-acl-basic-2001] rule permit source 2.1.1.2 0
[SwitchA-acl-basic-2001] quit
# Create a traffic class named classifier_1, and use ACL 2000 as the match criterion in the traffic class.
[SwitchA] traffic classifier classifier_1
[SwitchA-classifier-classifier_1] if-match acl 2000
[SwitchA-classifier-classifier_1] quit
# Create a traffic class named classifier_2, and use ACL 2001 as the match criterion in the traffic class.
[SwitchA] traffic classifier classifier_2
[SwitchA-classifier-classifier_2] if-match acl 2001
[SwitchA-classifier-classifier_2] quit
# Create a traffic behavior named behavior_1, and configure the action of redirecting traffic to
Ten-GigabitEthernet 1/0/2.
[SwitchA] traffic behavior behavior_1
[SwitchA-behavior-behavior_1] redirect interface ten-gigabitethernet 1/0/2
[SwitchA-behavior-behavior_1] quit
# Create a traffic behavior named behavior_2, and configure the action of redirecting traffic to
Ten-GigabitEthernet 1/0/3.
[SwitchA] traffic behavior behavior_2
[SwitchA-behavior-behavior_2] redirect interface ten-gigabitethernet 1/0/3
[SwitchA-behavior-behavior_2] quit
# Create a QoS policy named policy, associate traffic class classifier_1 with traffic behavior behavior_1,
and associate traffic class classifier_2 with traffic behavior behavior_2 in the QoS policy.
[SwitchA] qos policy policy
[SwitchA-qospolicy-policy] classifier classifier_1 behavior behavior_1
[SwitchA-qospolicy-policy] classifier classifier_2 behavior behavior_2
[SwitchA-qospolicy-policy] quit
# Apply the QoS policy named policy to the incoming traffic of Ten-GigabitEthernet 1/0/1.
XGE1/0/2
VLAN 200
Vlan-int200
200.1.1.1/24
XGE1/0/3
VLAN 201
Vlan-int201
201.1.1.1/24
XGE1/0/2
VLAN 200
Vlan-int200
200.1.1.2/24
XGE1/0/1
XGE1/0/3
Switch B
VLAN 201
Vlan-int201
201.1.1.2/24
77

Advertisement

Table of Contents
loading

Table of Contents