Table of Contents
Advertisement
•
Do not wipe the optical system
(lens, mirror) right after the product
has been turned off or while the
product is being operated. When
cleaning each part of the product,
remove the power cord and wipe
gently with a soft cloth. Do not
spray with water or wipe with a
wet cloth. Do not use detergents,
automobile or industrial polish,
abrasive substances, wax, benzene,
alcohol, water, etc. on the product's
main unit or optical system (lens,
mirror) as this may damage the
product.
- This can result in fire, electric
shock or cause damage to
the product (deformation and
corrosion).
•
Remove the plug from the outlet
before cleaning the product.
- Otherwise, this may result in
electric shock.
Others
WARNING
•
Some users may experience
a seizure or other abnormal
symptoms when they are exposed
to a flashing light or particular
patterns from a video game.
•
When you go out, place the
projector out of reach of animals,
and remove the power plug from
the wall outlet.
- Using a damaged power cord
may result in short circuit or fire.
•
Do not use the projector near high-
precision electronic devices or those
that transmit weak radio signal.
- This may affect the operation of
the product, causing an accident.
•
Only a qualified technician can
disassemble or modify the
projector. For diagnosis, adjustment,
or repair, contact your seller or our
service center.
- This may result in fire or electric
shock.
•
Proper ventilation required, do not
block airflow around unit. Doing
so can cause injury and internal
overheating.
•
To prevent damage to lamp,
unit must remain plugged in for
approximately 3 minutes after
power down to allow for proper
cool down (not applicable on LED
models).
11
Advertisement
Table of Contents
