Skip Channel Set And Cancel - Sanyo CP14SE1 Instruction Manual

T uning of the Channels / Private Position
T uning of the Channels / Private Position
6
Press the VOLUME + or - button to enter the desired
channel into Programme Position 6.
7
Once desired channel is located, select "MEMORY" by
pressing the Programme UP or DOWN button.
8
Press the MENU button to return to normal TV display.
To pre-set other Programme Positions, repeat steps 5-8.
Channels Swapping
Use this channel swapping feature to swap the channels
between two stored programme position. This feature is par-
ticularly useful after automatic tuning.
For example, to swap the channel between programme
position "6" and programme position "12".
1
Select programme position "6".
2
Press the SWAP button.
SWAP 6 AND -
3
Press the DIGIT button, " 1 " button and then " 2 "
button on the remote control to enter programme
number 12. (For example, to enter programme
number " 3 ", press " 3 " button only. )
SWAP 6 AND 12
4
Press the SWAP button.
The two TV channels will now have changed
places.
Private Position
How to Set the Private Position
Private position is used to restrict of programme
positions that you do not want others to watch. Any
position can be set as the Private position.
For example, to set the programme position "15" as
the private position.
1
Select programme position "15".
2
Press and hold the RECALL/COLOUR SYSTEM
button for more than 2 seconds.
BG
15
15
AUTO
MODE
SEARCH
POSITION
SYSTEM
The VOLUME + button will move tuning toward the
higher frequencies, and the VOLUME - button will
move tuning toward the lower frequencies.
SYSTEM
SIF
SKIP
MEMORY
SELECT

Skip Channel Set and Cancel

When there is a position you do not use, Position 4 for
example, by setting the SKIP Channel function it is possi-
ble to jump over this position, when you are selecting a
channel using the Programme UP/DOWN or CHANNEL
SCAN button.
For example, to set programme position "4" as Skip
channel ;
1
Enter to SEMI-AUTO or MANUAL tuning mode.
2
Select "POSITION" with the Programme UP or
DOWN button.
3
Press remote control "4" button to select Programme
Position 4. Use the DIGIT button and Programme
Selector (Number buttons) to enter Programme
Number. Do not use the VOLUME + or - button to
enter programme position in this settings.
4
Select "SKIP" by pressing the Programme UP or
DOWN button, then press the VOLUME + or -
button to set SKIP to ON. To cancel Skip Channel
function, set to OFF.
POSITION
SYSTEM
SIF
SKIP
O
5
Select "MEMORY" by pressing the Programme UP
or DOWN button, then press the VOLUME + or -
button for memory.
Any number of channels maybe set as Skip Channels.
6
Press the MENU button to return to normal TV display.
The programme number "15" will shift to centre of the
screen.
3
Press the MENU button.
B G
The picture will disappear, and "
the screen.
MANUAL
6
AUTO
AUTO
BG
OFF
OK
ADJUST BACK
P P
EXIT
M
4
AUTO
BG
ON
15
A U T O
15" will be display on
7