Element FLX-3702 User Manual page 10

Use a supplied antenna cable to connect the VHF/UHF signal to the LCD TV's ANT. terminal
(refer to page17).
Connect the AC power cord at the back of the TV and connect the power cord to wall outlet.
Insert the 2 batteries supplied in remote control.
Slide the back cover up to open the
Step1
battery compartment of the remote
control.
Insert two AA size batteries.
Step2
Make sure to match the (+) and
( - ) ends of the batteries with
the (+) and ( - ) ends indicated
in the battery compartment.
Slide the cover back into place.
Do not use caustic cleaners (porcelain, stainless steel, toilet, or oven cleaner
etc.) on the remote, as it may suff er damage.
Connect other an external A/V device (refer to page14-26).
Chapter 1 Introducing the LCD TV
9