Polaroid PDC 3070 User Manual page 44

Symptom
The Flash icon and the
image counter on the LCD
is flashing after I took my
last image using the Flash
Mode.
I get a blurred image when
uploading my images to
my computer.
The battery indicator icon
on the 1.4" LCD screen
will go "blank".
My image quality is
grainy.
My CD installation wizard
does not work.
The LCD on my PDC 3070
Camera has frozen when
you insert a SD card into
your PDC 3070 camera.
No web camera function.
AVI file cannot be played. DirectX version is lower
When connect the camera
to the PC in Capture
mode, Windows prompt to
insert system disk.
Please also refer to the help files & User Guide that accompany the enclosed applications. For further information
and support, please visit our website: http://www.polaroid-digital.com.
44
Problem
The PDC 3070 Camera
is processing the image
and recharging the flash
unit.
There may be a momentary
delay between pressing
the shutter button and the
actual exposure.
This means there is
insufficient power.
You may have selected
the wrong camera
frequency setting.
The auto installation file
is switched to off.
Or
The CD ROM is
disconnected.
No response from any of
the function buttons.
The camera is set to
Playback mode
Or
Have not installed the
PDC 3070 Driver.
than 8.0
PDC 3070 driver
installation has not
completed.
Polaroid PDC 3070 Digital Camera User Guide
Solution
Wait for the flash icon on the status
LCD to stop flashing and then take
another image.
Hold your PDC 3070 camera
steadily until you hear a "beep"
which indicates the exposure is
completed.
You need to change
batteries.
Using the different frequency
setting.
Pal for 50 Hz
NTSC for 60 Hz
Go to the computer desktop,
Right click on "My Computer".
Click "Properties". Select "Device
Manager". Double click on "CD-
ROM", double click on "CD-R"
(Normally the manufacturer's
name). Click on " Setting ". Ensure
"Auto insert notification " is ticked
and the " disconnect " is ticked.
If you change the settings the
computer will ask you to restart
your PC. Click " Yes " (Only for
Windows® 98SE & Me user)
Ensure you only use a new or
formatted SD card for use with your
PDC 3070 camera.
Set the camera to Capture mode
Or
Install the PDC 3070 Driver.
Install directx 8.0 or above. Visit
http://www.microsoft.com/directx for
more detail.
Insert the Windows CD or PDC 3070
driver CD. If PDC 3070 driver CD is
inserted, please set the path to "CD-Rom
drive\software\Driver\Sysfile". And
continue the installation.
www.polaroid-digital.com
the new