Table of Contents
Advertisement
The troubleshooting guide is designed to help you. If problems continue,
please contact your local customer support hot-line. See your registration
card for help line contact details.
Symptom
I
receive
an
error
message
when
I
installing the PDC 1050
Camera Driver.
I cannot upload images
to the PC.
I cannot run the PDC
1050 Camera Driver.
I
cannot
upload
images from the internal
memory
of
the
PDC
1050 camera to PC.
I cannot switch on my
PDC 1050 Camera after
inserting a CF™Card .
I press the shutter button
and get no response.
I get a blurred image
when
uploading
images to my computer.
Polaroid PDC 1050 Digital Camera User Guide
www.polaroid-digital.com
8 Troubleshooting Problems
Problem
PDC 1050 Camera Driver
am
does not load.
Connection failure.
Conflict with another camera
driver or capture device.
the
The CF™Card
inside the CF™Card slot.
The CF™Card is inserted all
the way in or card slot door is
not closed properly.
The PDC 1050 Camera is
processing the image.
or
The
internal
memory
CF™Card memory is full.
There may be a momentary
my
delay between pressing the
shutter button and the actual
exposure.
Shut down all other applications
and attempt to reinstall the
driver
Check the USB controller in
your BIOS if they are activated.
If these does not work contact
your national Customer Support
representative.
Check all cables connections are
secured.
If you have another camera
installed
remove
completely from your system to
avoid conflict with them.
is inserted
The
memory
higher priority than the internal
memory for image storage or
image transfer or delete.
Make
sure
inserted all the way in and close
the slot door properly.
Wait for this process to complete
and then take your next image.
or
Delete
some
internal memory of the camera
or CF™Card
Hold your PDC 1050 camera
steadily until you hear " two
beeps"
exposure is completed.
Solution
on
your
computer,
it
and
it's
driver
card
with
a
the
CF™Card
is
or
images
in
the
which
indicates
the
31
Advertisement
Table of Contents
