Polaroid iON 230 User Manual page 48

Symptom
Recorded pictures are not
saved in memory.
Colour of the playback
pictures is different from the
picture on the LCD screen
during recording.
Pictures are not displayed.
I cannot erase pictures.
AVI file cannot be played.
The camera is detected by the
Windows and works properly.
But a drive letter of the
Removable disk is not created.
There is no response from the
camera while pressing any buttons.
When connect the camera
to the PC in Capture mode,
Windows prompt to insert
system disk.
Please also refer to the help files & User Guide that accompany the
enclosed applications. For further information and support, please visit
our website: http://www.polaroid-digital.com.
48
Problem
Camera powers off before the save
operation is complete
Or
Removing the memory card before
the save operation is complete.
Sunlight or light from another
source is shining directly into the
lens during recording.
A memory card with non-DCF
pictures recorded with another
camera is loaded in the camera.
All the pictures in memory are protected.
DirectX version is lower than 9.0.
Or
Windows Media player not
installed in the computer
The removable disk crashes with the
network drives.
The LCD screen is frozen or the
camera is hanged.
iON 230 camera driver installation
has not completed.
Polaroid iON 230 Digital Camera User Guide
Solution
If the battery indicator is on the LCD
screen, replace batteries with a full
set of new ones as soon as possible
Or
Do not remove the memory card
before the save operation is complete.
Position the camera so that sunlight
does not shine directly onto the lens.
This camera cannot display non-DCF
pictures recorded onto a memory card
used by another digital camera.
Unprotected the pictures you want
to delete.
Install directx 9.0 or above.
Visit http://www.microsoft.com/directx
for more detail.
Or
Please go to
http://www.microsoft.com/windows/
windowsmedia/players.aspx to
download the Windows Media Player
to play the video clips.
Disconnect the crashed network drive and
reserve this drive letter for the camera.
Remove and re-install the battery or
batteries to reset the camera. Your
valuable data stored in the camera will
not be lost.
Insert the Windows CD or iON 230
driver CD. If iON 230 driver CD is
inserted, please set the path to "CD-
Rom drive\software\Driver\Sysfile".
And continue the installation.
www.polaroid-digital.com