System Setup - Honeywell Wi-Fi Thermostat 9000 Installation Manual

System Setup

On the home screen, touch
System Setup
System Setup Options (MENU > System Setup)
Screen Title
Language
Thermostat installed in
Your thermostat location
Your thermostat controls
Your system type
Your forced air heating
system type
Efficiency of your heating
system
Your heating system type
Number of cooling stages
Number of heating stages
Your fan control
Type of changeover valve
Number of heat pump
compressor stages
Your backup heat
Menu > System Setup
MENU
Settings and Options
English/Français/Español.
Home/Business (Thermostat is used in a residential (default) or commercial setting).
Touch THERMOSTAT button to display the screen where you can enter a custom
name using a keypad. If you have only one thermostat, you can leave the name as
THERMOSTAT. For business installations you can check a box to display the thermostat
name on the home screen.
Select Heating or Cooling or both (default).
Select Forced Air (default), Heat Pump, or Hot Water or Steam. Each option offers
different choices on the following screens.
Select how your forced air system is powered: Gas/Oil (default) or Electric.
Select Standard Efficiency Forced Air (default) or High Efficiency Forced Air.
If you selected Hot Water or Steam on "Your system type," select the specific heating
system here.
Select 1 Stage (default) or 2 Stages. If you are unsure, note which wires are connected: 'Y'
wire only (1 stage) or 'Y' and 'Y2'.
Select 1 Stage (default) or 2 Stages. If you are unsure, note which wires are connected: 'W'
wire only (1 stage) or 'W' and 'W2'.
Select whether your thermostat (default) or heating system controls the fan.
If you selected 'Heat Pump' on "Your system type," select whether it uses a cooling
changeover valve (default) or heating changeover valve.
Select 1 Stage (default) or 2 Stages. If you are unsure, note which wires are connected: 'Y'
wire only (1 stage) or 'Y' and 'Y2'.
No or Yes (default)
to modify the initial system setup.
7
Next
33-00235