Drive Chain - Polaris trailboss 04 Owner's Manual

Polaris 2004 atv owner's manual
Table of Contents

Advertisement

MAINTENANCE AND LUBRICATION
Adjustments

Drive Chain

Polaris ATV drive chains are equipped with o-ring-sealed, permanently
greased pins and rollers. However, the outer surfaces of the roller must
be lubricated.
Always inspect the drive chain prior to operating the vehicle. Check for
damaged or missing o-rings or damaged rollers. Also check for correct
slack adjustment. Maintain the stone guard to rear sprocket clearance
at 1/8" (.3 cm).
Regularly lubricate the drive chain with SAE 80-90 lube or an
approved o-ring chain spray lube. See page 108 for the part numbers of
Polaris products.
Washing the drive chain with a high pressure washer or
gasoline can cause damage to the o-rings, causing premature
wear and drive chain failure. Don't use a high pressure washer
or gasoline to clean the drive chain.
88
CAUTION

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

2004 trail boss

Table of Contents