Access The Product Rear Panel; Opening The Cable Management Arm - HP ProLiant DL160 Gen9 Maintenance And Service Manual

After performing the installation or maintenance procedure, slide the server back into the rack, and
5.
then press the server firmly into the rack to secure it in place.
Do one of the following:
6.
In a server that uses thumbscrew rack ears, tighten the captive thumbscrews.
o
In a server that uses quick-release latch rack ears, if necessary, tighten the shipping screws.
o
Connect the peripheral cables.
7.
Connect each power cord to the server.
8.
Connect each power cord to the power source.
9.

Access the product rear panel

Opening the cable management arm

To access the server rear panel:
Release the cable management arm.
1.
Removal and replacement procedures 29