Advertisement
TIPS ON HOW TO BEST USE YOUR BREVILLE BLENDER
DO
• •
Low speed is best for dressings,
marinades and foods that require mixing
until just combined, such as batters.
• •
High speed is best for pureeing or
cocktail making.
• •
Use PULSE for foods that only require short
bursts of power such crushing ice and nuts.
• •
Ensure all parts have been thoroughly
washed and dried before assembly.
• •
Ensure the blender is correctly assembled
before operating (see page 7).
• •
Ensure base of jug is thoroughly dry before
placing onto blender base before use.
• •
Ensure the blender is placed on a clean,
dry surface to operate.
• •
Liquids should be placed into blender
before solid ingredients, except where
specified in recipes.
• •
All foods should be cut into cubes
(approx. 2-3cm square) to achieve an
even result.
• •
When required use a plastic or rubber
spatula to wipe food down sides of jug
only when blender is in the OFF position
and has been switched off at power
outlet. Ensure blades have stopped
rotating. Do not use metal utensils as
they may damage the blades or jug.
• •
Do hold the lid down when starting to blend.
8
DON'T
• •
Do not blend thick or heavy mixture for
more than 60 seconds without turning off
the blender and stirring the ingredients,
and then continue blending.
• •
Do not place any objects, other than food,
into the jug whilst the motor is running.
• •
Do not use the jug to store food.
• •
As air does not circulate when blending,
the blender will not beat egg whites,
knead dough or mash potatoes.
• •
Do not remove the jug while the blender
is operating. Always switch off at the
power outlet before removing jug.
• •
Overloading the blender with more than
the specified quantity could cause the
motor to stall, turn the blender OFF,
unplug from power outlet and remove a
portion of the mixture before continuing.
MOTOR PROTECTION BUTTON (RESET BUTTON)
The safety reset button has been added to
the blender to preserve the motor life.
The switch will be activated when the
motor becomes too hot, or the load too heavy.
The unit will cease to operate. The switch is
located under the motor base will need to be
reset by depressing the red button, this can
only take place after 10 minutes. The motor
will need to rest for 10 minutes before
blending can resume.
9
Advertisement
