Rear Gearcase Oil; Oil Check - Polaris Phoenix 200 Quadricycle Owner's Manual

MAINTENANCE

Rear Gearcase Oil

Always check and change the rear gearcase oil at the intervals outlined
in the Periodic Maintenance Chart beginning on page 48.
Rear Gearcase Oil Recommendations
Gearcase
Rear
Gearcase Angle Drive Fluid

Oil Check

1. Position the vehicle on a level
surface. Place the transmission in
gear. Lock the parking brake.
2. Remove the check plug. View the
oil level. The oil level should be
at the bottom of the plug hole.
3. Remove the fill plug. Add the
recommended fluid as needed.
4. Reinstall the fill plug. Torque to
specification.
5. Reinstall the check plug. Torque
to specification.
Oil Change
1. Remove the skid plate.
2. Remove the drain plug. Drain the fluid into a drain pan.
3. Clean and reinstall the drain plug with a new sealing washer. Torque
to specification.
4. Remove the fill plug. Add 120 ml of the recommended fluid.
5. Reinstall the fill plug. Torque to specification.
6. Check for leaks.
7. Reinstall the skid plate. Discard used oil properly.
56
Lubricant
Premium ATV
Capacity Fill Plug
Torque
120 ml 34 Nm
Drain/Check Plug
Torque
24 Nm
Check Plug
Fill Plug