Download
Share
Print this page
  1. Manuals
  2. Brands
  3. PowerBass Manuals
  4. Power Supply
  5. APS-100
  6. Owner's manual

PowerBass APS-100 Owner's Manual

Autosound series
Hide thumbs

Advertisement

Quick Links

Download this manual
APS-100
APS-100X
Autosound Series Power Supply

Owners Manual

Please read through this manual to familiarize yourself with your new power supply. Should your PowerBass
AutoSound power supply ever require service, you will need to have the original dated receipt.

Advertisement

loading

Summary of Contents for PowerBass APS-100

  • Page 1: Owners Manual

    APS-100 APS-100X Autosound Series Power Supply Owners Manual Please read through this manual to familiarize yourself with your new power supply. Should your PowerBass AutoSound power supply ever require service, you will need to have the original dated receipt.
  • Page 2 In the interest of safety, PowerBass USA highly recommends listening at lower volume...

  • Page 3: Technical Features

    The APS-100X converts standard 220~240V AC household power to an adjustable 10~16V DC power, and supplies up to 100 amps of continuous power. The APS-100 Is a versatile piece of equipment that can be used in several applications such as retail audio displays, show cars, and test benches. •...

  • Page 4: Important Safety Instructions

    DC power generator isn’t available. • Do not connect the APS-100 to a battery that is deeply discharged. The initial high level of current draw will force the power supply into current limit mode for prolonged periods. This type of use is harmful to the power supply.
  • Page 5 • The binding post wire holes can accommodate up to 0 gauge wire 8. Connect the APS-100 AC cord to a standard 110~130V AC (220~240V AC APS-100X) outlet. 9. Connect the supplied LED voltage display panel to the port labeled Volt Meter.

  • Page 6: Operation

    OPERATION To use the APS-100 after you have correctly connected a device to it, flip the power switch to the on position. The LED should illuminate indicating the unit is on. If the LED does not illuminate check all connections. If all connections are good turn the unit off and confirm the wall AC outlet has power.
  • Page 7 WIRING EXAMPLE - SINGLE APS-100, MULTIPLE BATTERIES Fuse all connected devices as recommended by the manufacturer.
  • Page 8 Up to four APS-100 can be connected in parallel. The maximum available current will be determined by the sum of the rated capacity of each APS-100 in the circuit. In the example below the four parallel units of APS- 100 will supply about 400A of current.
  • Page 9 APS-100 SPECIFICATIONS AC 110V-130V Input Voltage: 120V AC±10% Input Frequency: 60Hz Adjustable Output: 10V-16V DC±0.5Volts Output Current: 100 Amps DC Continuous (Maximum) Line Regulation: Less Than ±5% Load Regulation: Less Than ±5% Efficiency: More Than 85% Overload Protection: FUSE 20A / 250V (Input Voltage:120V)
  • Page 10 APS-100x SPECIFICATIONS AC 220V-240V Input Voltage: 220V Ac±10% Input Frequency: 50Hz Adjustable Output: 10V-16V DC±0.5Volts Output Current: 100 Amps DC Continuous(Maximum) Line Regulation: Less Than ±5% Load Regulation: Less Than ±5% Efficiency: More Than 85% Overload Protection: FUSE 10A/250V (Input Voltage: 220V) Output Ripple: 150mV RMS Design: Switching Type Protection Temperature: 75°C...
  • Page 11 Some states do not allow limitations on the length of an implied warranty, so this limitation may not apply. No person is authorized to assume for PowerBass any other liability in connection with the sale of this product.
  • Page 12 PowerBass Autosound – A division of PowerBass USA, Inc. 2133 S. Green Privado – Ontario, CA 917161 Tel. (909) 923-3868 – Fax (909) 923-8048 www.powerbassusa.com...

This manual is also suitable for:

Aps-100x