Fujitsu FR60 FAMILY User Manual page 15

3.3.12 CS select (CPLD)
Chip select signals, selected by S401-1..3, will not be routed towards the target hardware!
For applications with extension board EMA-MB91V460A-300 or equivalent extension
boards, please select and set the corresponding chip select signal (CSx) used for the
extension board! Please also refer to the user guide of the extension board and to the
settings on the extension board itself.
E.g. EMA-MB91V460A-300 is configured to use chip select CS3, please set S401-1,2,3 on
EMA-MB91F467S-LS-176M07 to CS3 (ON, ON, OFF)!
In default setting all chip select signals are routed to the target hardware.
S401-1 S401-2
OFF OFF
ON OFF
OFF ON
ON ON
Don't care
Default: S401-1, S401-2: OFF, S401-3: ON
© Fujitsu Microelectronics Europe GmbH
EMA-MB91F467S-LS-176M07
Chapter 3: Switches and Jumpers
S401-3 Description
OFF CS0# is selected
OFF CS1# is selected
OFF CS2# is selected
OFF CS3# is selected
ON None selected
- 15 -
FMEMCU-UG-910070-17