[Lock] Menu - LG UP970 Owner's Manual

24 System Setting
HDMI Audio Setting
Set the audio output via HDMI1 or HDMI2.
[Auto]
Audio output will be set automatically based on
the devices connected to HDMI1 and HDMI2.
[HDMI1]
Audio will be output to the component
connected to HDMI1.
[HDMI2]
Audio will be output to the component
connected to HDMI2.
3 DTS Neo:6
If the player is connected to the multi-channel Audio
Receiver by HDMI connection, set this option to
enjoy the multi-channel surround sound with the
2-channel audio source.
[Off]
Outputs the stereo sound via front speakers.
[Music]
Outputs the multi-channel sounds that are
optimized for listening to music.
[Cinema]
Outputs the multi-channel sounds that are
optimized for watching movie.
,
Note
y This function is not available on an on-line
service.
y Only the audio source with less than 48
kHz sampling frequency is available for this
function.
y This function is availabe only when [Digital
Output] option is set to [PCM].

[LOCK] Menu

The [LOCK] settings affect only BD-ROM and DVD
playback.
To access the any features in [LOCK] settings, you
must enter the 4-digit security code you have
created.
If you have not entered a password yet, you are
prompted to do so. Enter a 4-digit password twice,
and press ENTER (b) to create a new password.
Password
You can create or change the password.
[None]
Enter a 4-digit password twice, and press
ENTER (b) to create a new password.
[Change]
Enter the current password and press
ENTER (b). Enter a 4-digit password twice, and
press ENTER (b) to create a new password.
If you forget your password
If you forget your password, you can clear it using the
following steps:
1. Remove any disc that might be in the player.
2. Highlight [Password] option in the [Settings]
menu.
3. Use Number buttons to enter "210499" .
The password is cleared.
,
Note
If you make a mistake before pressing
ENTER (b), press CLEAR. Then input the
correct password.