Drive Belt Installation - Polaris 600 RUSH Owner's Manual

MAINTENANCE
Clutch System

Drive Belt Installation

1. Drop the drive belt over the
drive clutch and pull back the
slack.
2. To ensure satisfactory belt
life, install belts so they oper-
ate in the same direction of
rotation by positioning the
identification numbers so that
you can read them. If
required, separate the sheaves
as outlined in the belt
removal procedures.
3. Turn the driven clutch moveable sheave clockwise while pushing
inward and forcing the belt down between the sheaves.
4. Hold the belt down between the sheaves and roll the bottom portion
over the outer clutch sheave. Work the belt to the outer edge of the
sheave.
5. Rotate the L-wrench to tighten the sheaves. Remove the wrench and
store in the tool kit.
6. Close the clutch guard and reinstall the retaining pin.
7. Reinstall the side panel.
98