Track Tension - Polaris 500 IQ Shift Owner's Manual

MAINTENANCE
Track Maintenance
WARNING! Moving parts can cut and crush body parts. When performing the
checks and adjustments recommended on the following pages, stay clear of all
moving parts. Never perform track measurement or adjustments with the engine
running.

Track Tension

Track adjustment is critical for proper handling. Always maintain cor-
rect tension and alignment.
Suspension
IQ
Tip: Tension adjustments should be made only after the track is warmed up and
limber.
1. Turn the engine off.
2. Lift the rear of the machine and safely support it off the ground.
3. Place the recommended weight or downward pressure on the track
at the specified distance (see chart) ahead of the center of the rear
idler wheel. Measure at the point where the weight is hanging.
88
TRACK TENSION DATA CHART
Weight
10 lbs. (4.54 kg)
Measurement
Location
16 in. (40 cm)
ahead of rear
idler shaft
Slack
Measurement
7/8-1 1/8 in.
(2.2-2.9 cm)