Oil Filter - Polaris 340 Touring Owner's Manual

MAINTENANCE
Fuel Filter/Fuel Lines
See your Polaris dealer for replacement of the in-tank fuel filter every
1000 miles (or annually).
Inspect the fuel lines regularly for signs of deterioration or damage.
Always check fuel line condition after periods of storage. Normal dete-
rioration from weather and fuel compounds may occur. Replace worn or
damaged fuel lines promptly.
Kinking the fuel lines or using a pliers or similar tools to remove fuel lines
may cause damage to the lines. If a fuel line has been damaged or kinked,
replace it promptly.

Oil Filter

The oil filter should be changed
annually or every 1000 miles (1600
km). Inspect oil line condition at
1000 miles (1600 km). Polaris oil
filters are specially designed for use
on Polaris products. We strongly
recommend the use of only Polaris
replacement parts. See page 58 for oil recommendations.
EDGE models use an oil filter that's built into the oil sending unit
located in the bottom of the oil tank. After changing the oil filter, bleed
the oil injection system of all trapped air. See your dealer for instruc-
tions, or have your dealer perform the filter change and bleeding opera-
tion for you.
NOTE: The direction of the arrow indicates the direction of flow through
the filters.
88
CAUTION