Navigation Operation / Auxiliary Inputs/Rear Camera Operation - Dual DV927BT Installation & Owner's Manual

Navigation Operation
Front 3.5mm Aux Input & Rear RCA A/V Input
Auxiliary Input
Using AV Input
Using Rear Camera
Auto Selection
To access navigation functions, select Navigation from the Main Menu. For
questions regarding navigation operation, refer to the Navigation manual
available online at dualav.com/support/manuals.php.
Connect an optional audio source into the 3.5mm (front panel) input. Select
auxiliary input from the Main Menu to listen to audio.
external audio source as needed (if connected to the headphone output of the
device).
Connect an optional audio/video source to the rear auxiliary input (Red/White/
Yellow RCA connectors). Refer to page 6 for details. Select AV Input from the
Main Menu to listen to audio. Engage parking brake to watch video.
Rear Camera Operation - (Optional)
Connect an optional rear camera to the Camera Input (Black RCA connector).
Refer to the wiring diagram for details.
Manual selection - Touch CAMERA icon from the Main Menu or from any
operational mode (when enabled) to select camera mode.
on the screen to exit camera mode.
Note: The manual mode is for dedicated cameras that are ALWAYS on while
driving, it is not meant for cameras that are connected to the vehicle's reverse
light.
The unit will automatically select camera mode when connected to the reverse
lamp circuitry.
Note: The external video output is not active when using the rear camera input.
DV927BT OPERATION
Navigation Operation
Adjust volume on the
Touch the top left area
22