Sony Ericsson T606 User Manual page 22

Settings While On a Call
To Change the Earpiece Volume During a Call
Press the up or down volume key on the side of the
phone to increase or decrease the earpiece volume.
To Mute the Microphone During a Call
Press and hold until the display shows
C
and hold again to resume the conversation.
C
To Automatic Redial
If the connection of a call fails and the display shows
, press . The phone redials the number until
Retry? Yes
the call is connected, you press a key or you receive a
call.
Note: Do not hold the phone to your ear while waiting.
When the call is connected, the phone gives a loud
signal.
When you receive a call, the phone rings and the
display shows .
Answer?
If the caller's number is identified by the Caller ID
service, the number is displayed. If you have saved the
Draft for Sony Ericsson -- Preliminary Copy
number in your contacts, both the name and number
are displayed. If you have assigned a picture to the
contact, the picture is displayed. If the number is a
restricted number, the display shows
To Use the Speakerphone
While on a call, press
. Press
Muted
To Send Tone Signals
You can use telephone banking services or control an
answering machine by sending tone signals (also known
as DTMF tones or touch tones) during a call.
• To send the tones, press the number keys
.
#
• To clear the display after the call is finished, press
left softkey
Unknown
to activate speakerphone.
.
.
, and
0–9 *
Calls
15