Brake Pedal; Throttle Pedal - Polaris Ranger 4x4 500 EFI 2007 Owner's Manual

FEATURES AND CONTROLS

Brake Pedal

Depress the brake pedal to slow or stop the vehicle. Apply the brakes
while starting the engine.

Throttle Pedal

Push the pedal down to
Brake
increase engine speed.
Pedal
Spring pressure returns
the pedal to the rest
position when released.
Always check that the
throttle pedal returns
Park Brake
normally before start-
Release
ing the engine. Make
sure there's adequate
Park Brake
throttle pedal freeplay.
Throttle
Pedal
See page 78 for throttle
Pedal
pedal adjustment proce-
dures.
Park Brake Pedal
Engage the park brake when parking the vehicle to help prevent the
vehicle from rolling. To engage the park brake, apply the brakes, then
push the park brake pedal down firmly and fully with your foot.
Park Brake Release
Always apply the service brakes before releasing the park brake. To
release the park brake, pull the park brake release handle. Make sure the
park brake pedal is functioning properly before each operation.
30