City/City 1/City 2 Modes - Whistler GT-268Xi User Manual

City/City 1/City 2 Modes

Whistler's City Modes are designed to reduce the annoyance
of automatic door openers, intrusion alarms and other devices
which share frequencies with police radar. Generally, X band is
used for these devices.
• Press City to cancel Highway Mode and engage City Mode.
The display will switch from"H" to "C".
• Press City again to enter City 1 Mode.
• Press City again to enter City 2 Mode.
NOTE: The City 1 or City 2 numeric indicator only illuminated
briefly.
• Press City a fourth time to cancel City 2 Mode and returns the
unit to Highway Mode.
In City Mode, weak speed/safety radar signals give an initial
alarm of two beeps, and then remain quiet until the signal
becomes very strong. When the signal strength increases,
two additional beeps are provided. City 1 and City 2 Modes
operate the same as Highway Mode, but in City 1 Mode, only
the X band is lowered. In City 2 Mode, X-band is not
detected.
CAUTION: Some towns/small cities may still be using X band
radar. City Modes do not change the audio alert for laser.
OPERATION
12