Harman Kardon AVR 3550HD Service Manual page 12

AVR3550HD
MAIN REMOTE CONTROL FUNCTIONS
Volume Control:
Press this button to raise or lower the volume.
Navigation ( ‹
/ /
⁄ ¤
used to make selections within the menu system. These buttons are
also used to operate the tuner.
Alphanumeric Keys:
radio station frequencies or to select station presets. Use the alphabetic
keys with other products as required. When prompted for a text entry,
the first press of the key displays the first letter printed above the key.
Each additional press displays the other letters. When the desired
letter appears, wait a moment for it to be entered before moving to
the next character.
Last Channel:
When controlling a cable, satellite or HDTV set-top
box or a TV, press this button to return to the previous television channel.
Activity:
This button may be programmed to transmit a series of
commands with a single press, which is useful for powering on all
devices and selecting the correct settings on each device, or for selecting
multidigit channels. After a string of commands has been programmed
into an Activity, execute it by pressing this button, then the Alphanumeric
Key (or the AVR Power On Button) into which the Activity was programmed.
See the Advanced Functions section for more information on Activities.
Back/Exit:
Press this button to return to the previous menu or to exit
the menu system. This button may have the same effect with some
source devices.
Menu Button:
This button is used to display the main menu on some
source devices. To display the AVR 3550HD's main menu, press the
AVR Settings Button.
Disc Menu:
While a DVD is playing, press the DVD Source Selector,
then this button, to display the disc's menu.
Teletext Buttons:
Use these buttons with a Teletext-capable televi-
sion if your broadcast, cable or satellite provider offers Teletext service.
They are normally not used in North America. These buttons are also
used to operate some source devices. See Table A13 in the appendix
for details.
Channel/Page Control:
control selects a preset radio station. Press these buttons while operat-
ing a cable, satellite or HDTV set-top box or a television to change
channels. The Page control may be available with some DVD players
when playing a DVD Audio disc containing pages of images associated
with a track.
Record Button:
Use this button to make recordings when an audio
or video recorder is in use.
AVR Settings Button:
Menu. It is also used to switch the remote's device mode from a source
device to the AVR.
Info Settings Button:
Menu, which contains the settings for the current source.
14
› ) and OK Buttons:
/ These buttons are
Use these buttons to enter numbers for
When the tuner has been selected, this
Press this button to display the AVR's Main
Press this button to display the AVR's Info
Source Settings Button:
button to display a source device's settings menu.
Zone Selector:
Use this switch to select whether AVR commands
will affect the main listening area (Zone 1) or the remote zone of a
multizone system (Zone 2). For normal operation, leave the switch in
the Zone 1 position.
Track Skip:
These buttons have no effect on the receiver, but are
used with source components to change tracks or chapters.
Transport Controls:
These buttons have no effect on the receiver,
but are used to control many source components.
Light:
Press this button to illuminate the buttons on the remote. Press
it again to turn the backlight off, or wait ten seconds after the last button
press for the light to turn off on its own.
Learn:
The AVR 3550HD remote is capable of "learning" individual
IR codes from the original remote that came with your TV or a device
that is connected to any of the source inputs. See Step Eight of the
Installation section for instructions on learning remote codes.
12
harman/kardon
Press a Source Selector and then this
14