Security; Pin Code Request - LG U8210 User Manual

Req. Max UL Bitrate Choose the Request Maximum Upload
Req. Max DL Bitrate Choose the Request Maximum Download
- Press "Save" key to save any configuration changes.

3.4 Security

You can activate a PIN code.When it is activated, a window asking
you to enter the PIN code appears when you turn on the phone so
as to prevent unauthorized use of the phone.

3.4.1 PIN code request

You can activate a PIN (Personal Identification Numeric). You can
check the current status of configuration from the status bar.
Item
Enable PIN Request
Disable PIN Request
PIN request and release procedures
1. Select 'PIN request' item from the list, and press [Select]. Then a
window allowing you to select 'Enable' or 'Disable' appears.
- Select 'Enable'/'Disable' from the list, press [Select], and input
the current PIN code to set the PIN request. If 'PIN request' is
already enabled/disabled, an "Already enabled"/ "Already
disabled" message will be displayed.
2. 3 incorrect PIN code entries in the PIN code input window would
invalidate the PIN code. In this case, you have to input the PUK
(PIN Unblock Key) code to configure the PIN code again.
Bitrate from the list. (Default is "Subscribed")
Bitrate from the list.(Default is "Subscribed")
Description
You have to input the PIN code each
time the mobile phone is turned on.
You do not have to input the PIN code
when the mobile phone is turned on.
Settings
51
U8210 User Guide