Jled1: Rgb Led Connector; Ez Debug Leds - MSI Z270M MORTAR Manual

JLED1: RGB LED connector

This connector allows you to connect the 5050 RGB LED strips.
Important
This connector supports 5050 RGB multi-color LED strips (12V/G/R/B) with the
y
maximum power rating of 3A (12V). Please keeping the LED strip shorter than 2
meters to prevent dimming.
Always turn off the power supply and unplug the power cord from the power outlet
y
before installing or removing the RGB LED strip.
Please use GAMING APP to control the extended LED strip
y

EZ Debug LEDs

These LEDs indicate the status of key components during booting process. When an
error is occurred, the corresponding LED stays lit until the problem is solved.
36
Overview of Components
1 +12V
3 R
1
JLED1
CPU - indicates CPU is not detected or fail.
DRAM - indicates DRAM is not detected or fail.
VGA - indicates GPU is not detected or fail.
BOOT - indicates the booting device is not detected
or fail.
1
2 G
4 B
5050 LED strip