Call Waiting; Diverting Calls; Push To Talk - Nokia 6260 User Manual

r1024_en.book Page 25 Thursday, July 8, 2004 12:40 PM

Call waiting

If you have activated the Call waiting service (network service), you will
be notified of a new incoming call while you have a call in progress.
1. During a call, press
put on hold. To switch between the two calls, press Swap.
2. To end the active call, press

Diverting calls

Go to Menu→Settings→Call
When this network service is activated, you can direct your incoming
calls to another number, for example, to your voice mailbox number. For
details, contact your service provider.
• Select one of the divert options, for example, select
voice calls when your number is busy or when you reject incoming
calls.
• Select Options→
the divert setting off, or
activated or not.
• To cancel all active diverts, select Options→
See "Indicators in standby mode" on page 17.
You cannot have barring of incoming calls and call diverting active at
the same time. See "Call barring" on page 96.

■ Push to talk

Go to Menu→PTT.
Push to talk over cellular is a two-way radio service (network service)
available over a GSM/GPRS cellular network. Push to talk provides direct
voice communication connected with pressing
You can use push to talk to have a conversation with one person or with
a group of people having compatible devices. When your call is
connected, the person or group you are calling does not have to answer
the phone. Besides the GPRS counters, the phone registers only one-to-
one calls in the recent calls lists in Log. The participants should confirm
to answer the waiting call. The first call is
.
divert.
Activate to set the divert setting on,
Check status to check whether the divert is
Cancel all
C a l l f u n c t i o n s
If busy to divert
Cancel to set
diverts.
.
25