Table of Contents
Advertisement
Basics
Transferring data via a USB connection
You can connect your previous device to your device with the USB connector and a USB cable
to easily and quickly transfer data without installing an app in the previous device.
1
Plug the USB connector into the multipurpose jack of your device.
2
Connect your device and the previous device using the USB cable.
Previous device
When the app selection pop-up window appears, tap Smart Switch → START.
3
Your device will recognise the previous device and a list of data you can transfer will
appear.
4
Follow the on-screen instructions to transfer data from the previous device.
Do not disconnect the USB cable or USB connector from the device when you are
transferring files. Doing so may cause data loss or device damage.
Transferring data with the USB connector increases the battery power consumption.
Ensure that the battery is fully charged before transferring data. If the battery power is
low, data transfer may be interrupted.
Your device
1
2
38
USB connector
USB cable
Advertisement
Table of Contents
