Table of Contents
Advertisement
System Administration
The System Administration screens provide access to system functions such as firmware
upgrades, configuration backup/restore, remote logging and utilities.
System Administration - System Upgrade
The System Administration - System Upgrade screen allows you to upload updates to the
multinode's firmware. Configuration files also can be copied from one multinode to
another. There are three tabs on the System Upgrade screen.
The Firmware Upgrade tab allows you to browse and select new files to upgrade the
mesh (multinode) and sensor (field I/O radio) firmware.
The Local Configuration Upgrade tab and the Remote Configuration Upgrade tab
allow you transfer (copy) the system configuration file from one mulitnode to another
multinode.
Firmware Upgrade
To perform a firmware upgrade on a multinode:
Step
You must be logged in as the Crypto Officer to perform this procedure.
1
On the System Administration - System Upgrade screen, the Firmware
Upgrade tab is the default view.
There are two firmware upgrade choices:
•
Upgrade Mesh software
•
Upgrade Sensor Radio software
2
Click Browse... to navigate to the directory and select the software file to be
uploaded.
3
Click on the appropriate Upload Firmware button to begin the software
upload.
4
Either of the two events will occur to indicate successful upload of the
software:
•
The multinode will reboot after the software upload is completed.
R110
6/08
Action
OneWireless Multinode User's Guide
Configuration
System Administration
65
Advertisement
Table of Contents
