Installing The Cap Over The Speaker/ Microphone Jacks<Nx-3220/ Nx-3320; Installing The (Optional) Speaker/Microphone <Nx-3220/ Nx-3320 - Kenwood NX-3000 series User Manual

instaLLinG the CaP over the sPeaKer/
MiCroPhone JaCKs
Install the cap over the speaker/ microphone jacks when not
using an optional speaker/ microphone.
note: To keep the transceiver water resistant, you must cover the
speaker/ microphone jacks with the supplied cap.
1 If you are not using an optional speaker/
microphone or headset, install the cap
over the Speaker/ Microphone Jacks.
2 Secure the cap in place using the
dressing screw.
instaLLinG the (oPtionaL) sPeaKer/
MiCroPhone
1 Insert the speaker/ microphone plugs
into the speaker/ microphone jacks of
the transceiver.
2 Place the locking bracket over the
speaker/ microphone plugs so that the
locking tabs insert into the transceiver
grooves.
3 Secure the locking bracket in place
using the dressing screw.
18
<nX-3220/ nX-3320>
<nX-3220/ nX-3320>
Speaker/
microphone
jacks cap
Speaker/ microphone
locking bracket